|
|
|
|
|
System
And Installation Academy
DigiGuard Security
Systems FAQ
|
Keyboard Operation Of
SpeedDome PTZ Camera
|
Keyboard Model: AU40B
|
|
|
Select Camera
Click Camera ID
Click 1 for cam 1
Enter
|
|
|
Preset Location... |
|
Setup Preset
Location
Move to the location that you want
Click
Preset
Press
1
for preset location 1
Click
Enter
|
 |
|
Cruise function...
(Neon, Samsung, Pelco-D / P only)
This is the function that allows the user to set the rotating
picture
at timed intervals from different camera positions.
The
positions of the camera will be set through the Preset
Location.
This must be done prior to setting the Cruise
Function.
Setup Cruise
Click Shot button
Select
1
to go
Select
ON
On the display you
should see...Track=01
Sum=06
Click TELE
to go down menu, click
WIDE
to go up menu
Set No.:01 Point, Speed and Time
Set No.:02 .... etc.
When you are finished setting the speed/time,
select
OFF to save
*If
you move the joystick to different location, it will exit
without saving the setting
|
|
 |
|
|
Setting AutoPan Function... |
|
Starting Point...
Select Auto +
ON
Ending
Point...
Move to the end point location
Select Auto +
Enter
|
|
|
Dip Switch
|
Samsung |
White Up:
1.6 Down 2,3,4,5,7,8 |
|
NEON/9600Bps |
White up:
1,6 down: 2,3,4,5,7,8 |
|
Pelco-D/2400Bps |
White up:
1,2 down: 3,4,5,6,7,8 |
|
Pelco-P/4800Bps |
White up:
3,5 down: 1,2,4,6,7,8 |
|
Pelco-P/9600Bps |
White up:
3,6 down: 1,2,4,5,7,8 |
|
Panasonic/9600Bps |
White up:
1,3,6 down: 2,4,5,7,8 |
|
Ultrak/9600Bps |
White up:
1,2,3,4,6 down: 5,7,8 |
|
Kalatel/4800Bps |
White up:
1,2,4,5 down: 3,6,7,8 |
|
|
|
|
|
