System And Installation Academy

DigiGuard Security
Systems FAQ

Camera Cable And Power Adaptor Connection...

Cut the Power Adaptor Wire
at the end

Wrap the exposed wire end
with Electrical Tape

Power Adaptor

We use BNC+Power Combo Cable
for the camera connection

At the camera site:

Connect combo cable Power
wire to the DC cord cable

Connect DC cord to the camera

   Connect Red Line (+) to the
       DC cord with White Dash Line

   Connect Black Line (+) to the
       DC cord with Black Line

Connect BNC to Camera Video

Power Combo Cable

DC Cable connector

DC cord

video to camera connection

Camera Connection Diagram...

Do NOT plug in the Camera Power Adaptor to the wall jack or
        turn it on until the assembly is complete

Connect the power wires on the green adaptor first
The right wire is RED and the left wire is BLACK

Connect the power wires on the power adaptor.
The right wire is RED and the left wire is BLACK

Connect the CoAx cable to the camera

Connect the green adaptor to the camera

If you are using an Auto Iris Lens, change the switch to the
DC Drive

Plug in the Power Adaptor to the wall jack

Check the power LED red light on the camera for evidence of
power connection

: HOME : OUR PLAN : ACADEMY : EQUIPMENT : MARKETING : SITEMAP :

System And Installation Academy DigiGuard Security Systems FAQ

Camera Cable And Power Adaptor Connection...

System And Installation Academy

DigiGuard Security
Systems FAQ